Prism Solar S single-phase

1.134,601.213,90 VAT included

Single-phase 240V version, with Type 2S socket equipped with shutter, for charging powers up to 7.4kW:

  • Suitable for any single-phase meter, of any power
  • It automatically regulates the consumption to avoid disconnection from the grid (blackouts at home)
  • Prism recharges your electric car using the excess power produced by your solar panels
  • It works well with an energy storage system, such as a Powerwall
  • Directly connected to the internet via Wi-Fi or Ethernet (connecting it to your house router with an Ethener cable)
  • It can be managed using a smartphone, a computer and/or the cloud
  • Supplied with load-balancing sensor
  • Equipped with RFID reader and with two RFID keys
  • Resistant to rain and with protection against low pressure water jets, IP55 protection rating


Prism Solar S single-phase shares the same basic features with the other products in the Prism range. Different models differ in the type of power supply (single-phase or three-phase).

Prism Solar S single-phase – technical characteristics:

Suitable for any single-phase meter of any power rating.
This means that it can also be connected to lower power meters (e.g., 3kW) while still allowing the charging of an electric car to be managed, although, of course, only up to the maximum power of the meter in the system. But when the available power at the meter should be increased, Prism Solar S will already be able to handle the new power.

Automatically adjusts consumption to avoid disconnection from the grid.
Regardless of the meter installed, Prism Solar S single-phase automatically adjusts the power sent to the car, measuring the energy absorbed by the rest of the house, so that the meter never intervenes for overloads due to your electric car, avoiding leaving you in the dark. A load-balancing sensor is supplied with Prism.

It uses energy produced by a photovoltaic system to recharge the car.
If you have a photovoltaic system, you already know that energy produced in excess of your consumption is sent to the power grid. Prism Solar S Single Phase can detect this excessive production and use it to charge your electric car instead of giving it to the grid.

Equipped with Type 2S socket outlet with shutter.
All the features that have made Prism Solar famous but equipped with a socket instead of a cable and connector.
Type 2S socket with shutter, for maximum safety of use.
Optional GSM connectivity.

It is managed via smartphone/desktop and via cloud.
Of course, it is necessary for Prism to be connected to the Internet, a connection available via cable or even via Wi-Fi if Prism can reach the home Wi-Fi signal. And even if Prism cannot be connected to the internet, it is always possible to configure it and use its internal Wi-Fi.

It works as a repeater for the Wi-Fi network.
When it is possible to connect Prism to the Internet via Wi-Fi or cable (Ethernet network), it is possible to use Prism as a Wi-Fi signal repeater to have the connection in the garage as well, for example, to be able to update the car’s firmware while charging.

It includes an RFID reader under the front cover.
And it also comes with two RFID keys that can be used, for example, to start charging the car in situations where it is not possible (or desired) for charging to start automatically when the connector is plugged into the car.

Already equipped with RCM (Residual Current Monitor).
There is no need to add this AC/DC current protection during installation because it is already present in Prism Solar S single-phase to ensure maximum safety and to minimize installation costs.

It is installed outdoors and is not afraid of contact with water.
Like all components in the Prism range, the loader can be installed outdoors. Prism is not afraid of exposure to the intrusion of liquids and/or solid particles (such as dust).
This is thanks to a specially designed cover. In fact, the body of the cover is closed by no less than 12 screws, protecting the most sensitive electronic parts.
The IP55 rating indicates that the device is protected against dust, which, however, must not enter in any significant quantity, as well as against soft water jets.