Go to the bottom of the page and click “Go to Dashboard” to finish the configuration.<\/li>\n<\/ul>\n\nUse<\/h2>\n\n
Once entered completed the Prism configuration wizard is ready to use!<\/p>\n\n
If configured correctly it will automatically adapt the charging power so as not to blow the meter or charge only with excess PV power if set to Solar Mode.<\/p>\n","protected":false},"excerpt":{"rendered":"
Introduction Smart Meter [SMAME] is the device that enables three-phase products to measure the consumption of the electrical system. SMAME is critical in allowing three-phase Prism Solar to handle load balancing-that is, to automatically adjust charging power so as not to have the meter disconnected or to charge only with PV-generated energy that would otherwise be fed into the grid. Smart Meter measures system consumption thanks to its sensors, called TAs (Current Transformers, which are nothing more than clamps that must be opened and closed around the electrical wires on which you want to measure consumption. The Smart Meter is compatible with two types of sensors: Version Max Current (per phase) Maximum cable diameter Supply SENS100 100 A 25 mm Included with all three-phase Prisms SENS1000 1000 A 50 mm Accessory* * SENS1000 are available for purchase in our online shop. All single-phase Prisms do not need the Smart Meter; the SENS100 supplied as standard should be connected directly to Prism. For more information follow the Installation Manual supplied with Prism. This guide is for Smart Meter configuration only. For all other Prism configurations and features, please refer to the online documentation. Installation Refer to the Installation Manual provided with Prism for Smart Meter installation. In case of Cluster installation, it is necessary to connect the Smart Meter only to the Primary Prism; refer to the Cluster Installation and Configuration Guide for more information Configuration Prerequisites: How to configure the Smart Meter: If the parameters are not correct, Prism load balancing will not be able to work! To make sure the readings match, turn off the PV system, turn on some high-consumption device (hair dryer, oven, induction) and put the car on charge: the power reading will increase accordingly! Absence of variation indicates incorrect sensor placement! Use Once entered completed the Prism configuration wizard is ready to use! If configured correctly it will automatically adapt the charging power so as not to blow the meter or charge only with excess PV power if set to Solar Mode.<\/p>\n","protected":false},"author":34,"featured_media":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","footnotes":""},"doc_category":[],"doc_tag":[1671,560,1736],"class_list":["post-21392","docs","type-docs","status-publish","hentry","doc_tag-how-to-en","doc_tag-prism-en","doc_tag-smart-meter-en"],"year_month":"2026-05","word_count":447,"total_views":0,"reactions":{"happy":0,"normal":0,"sad":0},"author_info":{"name":"veroweb","author_nicename":"veroweb","author_url":"https:\/\/silla.industries\/en\/author\/veroweb\/"},"doc_category_info":[],"doc_tag_info":[{"term_name":"How to...","term_url":"https:\/\/silla.industries\/en\/docs-tag\/how-to-en\/"},{"term_name":"Prism","term_url":"https:\/\/silla.industries\/en\/docs-tag\/prism-en\/"},{"term_name":"Smart meter","term_url":"https:\/\/silla.industries\/en\/docs-tag\/smart-meter-en\/"}],"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"betterdocs-category-thumb":false,"post-thumbnail":false,"twentytwenty-fullscreen":false,"mailpoet_newsletter_max":false,"menu-26x26":false,"menu-36x36":false,"menu-48x48":false,"woocommerce_thumbnail":false,"woocommerce_single":false,"woocommerce_gallery_thumbnail":false},"uagb_author_info":{"display_name":"veroweb","author_link":"https:\/\/silla.industries\/en\/author\/veroweb\/"},"uagb_comment_info":0,"uagb_excerpt":"Introduction Smart Meter [SMAME] is the device that enables three-phase products to measure the consumption of the electrical system. SMAME is critical in allowing three-phase Prism Solar to handle load balancing-that is, to automatically adjust charging power so as not to have the meter disconnected or to charge only with PV-generated energy that would otherwise…","knowledge_base_info":[],"knowledge_base_slug":[],"_links":{"self":[{"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/docs\/21392","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/users\/34"}],"replies":[{"embeddable":true,"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/comments?post=21392"}],"version-history":[{"count":0,"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/docs\/21392\/revisions"}],"wp:attachment":[{"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/media?parent=21392"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/doc_category?post=21392"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/silla.industries\/en\/wp-json\/wp\/v2\/doc_tag?post=21392"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"Sensor](\"https:\/\/silla.industries\/wp-content\/uploads\/2023\/05\/IMG-Switch_sensori.gif\")
<\/li>\n<\/ul>\n\n![\"\"\/](\"https:\/\/silla.industries\/wp-content\/uploads\/2025\/02\/Contatore.jpg\")
<\/li>\n\n\n\n![\"Smart](\"https:\/\/silla.industries\/wp-content\/uploads\/2023\/05\/IMG-tipo_di_sensore_flagged-1081-e1683622413329.jpg\")
<\/a><\/li>\n<\/ul>\n<\/div><\/div>\n\n