Prism Solar RFID single-phase (shipping in 3 days)

1.130,001.160,00 VAT included

240V single-phase version, for charging powers up to 7.4kW:

  • It is suitable for any single-phase meter, of any power
  • It automatically regulates the consumption to avoid disconnection from the grid (blackouts at home)
  • Prism recharges your electric car using the excess power produced by your solar panels
  • It works well with an energy storage system, such as a Powerwall
  • It is directly connected to the internet via Wi-Fi or Ethernet (connecting it to your house router with a wire)
  • It can be managed using a smartphone, a computer and/or the cloud
  • It is supplied with a Type2 connector cable (the standard in Europe)
  • It is supplied with load-balancing sensor
  • It is equipped with RFID reader and with two RFID keys
  • It is eligible to participate in the Arera trial
  • Resistant to rain and water jets, IP65 protection rating
Paga un deposito di 300,00 per item

Description

Prism Solar single-phase shares the same basic characteristics with the other Prism products. The models differ in the type of power they supply (single-phase or three-phase) and in the number of available outputs (e.g. how many cars can be recharged with one Prism at the same time).

Prism Solar RFID single-phase – technical features:

It is suitable for any single-phase meter, of any power
this means that it can also be connected to electric meters with lower power (e.g 3kW), so it will still allow the management of the charge of an electric car, obviously, only up to the maximum power supplied by the meter. But if you decide to boost the power of the electric-meter, your Prism Solar will already be able to handle the new amount of power.

It automatically regulates the consumption to avoid disconnection from the grid (blackouts at home)
regardless of the electric-meter installed, single-phase Prism Solar automatically regulates the power provided to the car, measuring the energy absorbed by the rest of the house. In this way, the electric-meter does not have to intervene because of overloads caused by the charge of your electric car.Prism will never leave you without electricity at home; a load-balancing sensor is supplied with Prism.

It uses the energy produced by a solar system to recharge the car
if you have a photovoltaic system you already know that the energy that it produces in excess is sent to the electricity grid. Single-phase Prism Solar can detect this surplus production and use it to charge your car instead of giving it away to the grid.

It is equipped with a 5mt Type2 connector cable
type 2 connectors are the standard in Europe: zero compatibility problems.

It can be managed with a smartphone, a computer and/or the cloud
Prism has to be connected to the internet via Ethernet cable or Wi-Fi (if the Wi-Fi signal can reach the space where Prism is installed). And even if Prism cannot be connected to the internet, it is always possible to configure it and use to its internal Wi-Fi.

It works as a Hotspot for the Wi-Fi network
it is possible to use Prism as a Hotspot when Prism is connected to the internet via Wi-Fi or Ethernet cable. It is useful to update the firmware of the car while it is recharging.

It includes an RFID reader under the front cover
it also comes with two RFID keys to be used in order to start the charge in situations when it is not possible (or desired) for it to start automatically.

It is already equipped with a RCM (Residual Current Monitor)
it is not necessary to add a protection for AC / DC current while installing Prism since it already has it. It ensures maximum safety and minimizes installation costs.