Non sai qual è la soluzione giusta per te?
Tutti i prodotti Silla Industries
Scegli la soluzione migliore per le tue esigenze
Prism Solar Twin three-phase
The charging station for those who think big.
Prism Solar Twin Three-phase is Silla Industries' charging station with two independent outlets on a three-phase system: each of the two outlets delivers up to 22 kW, even when both are in use at the same time. A professional solution in a friendly format. Twin Three-phase offers maximum performance on both outlets simultaneously.
All the energy intelligence of Prism Solar. Photovoltaic integration, load balancing, app management, RFID authentication, OCPP protocol, and time-slot scheduling: all standard, as across the entire Prism Solar range.
Prism Solar Twin single phase
Charge two cars at the same time.
Prism Solar Twin Single-phase is Silla Industries' wallbox with two independent charging outlets, designed for those with two electric vehicles to charge on a single-phase system. One single charging station installed, half the electrical work, twice the convenience.
The power available on the single-phase meter is intelligently distributed between the two outlets dynamically. Balancing is automatic, in real time, and also takes overall consumption into account.
All the energy intelligence of Prism Solar. Twin Single-phase brings all the features of the Prism Solar range to the dual outlet: photovoltaic integration, management via the Silla app and the Monitor Portal web app, RFID, time scheduling, OCPP. You can direct excess solar energy to a single outlet or to both.
Simple, streamlined installation. A single charging station replaces two separate wallboxes, with just one connection to the electrical system. The load-balancing sensor is included.
Prism Solar Three-phase
Three-phase version, 240/400V, for charging power up to 22kW:
- Compatible with the ARERA pilot program
- Suited to any three-phase meter, regardless of power rating
- Automatically regulates consumption to prevent disconnection from the grid
- Uses energy produced by a solar system to charge the car
- Communicates with an energy storage system, such as a Powerwall
- Connects to the internet via Wi-Fi or ethernet network (cable)
- Managed via smartphone with the Silla app
- Supplied with a Type 2 cable and connector (the European standard)
- Supplied with three sensors (it's three-phase) for load balancing
- Equipped with an RFID reader and supplied with one card
- Resistant to rain and water jets, IP65 protection
Prism Solar single-phase
240V single-phase version, for charging powers up to 7.4kW:
- It is suitable for any single-phase meter, of any power
- It automatically regulates the consumption to avoid disconnection from the grid (blackouts at home)
- Prism recharges your electric car using the excess power produced by your solar panels
- It works well with an energy storage system, such as a Powerwall
- It is directly connected to the internet via Wi-Fi or Ethernet (connecting it to your house router with a wire)
- It can be managed using a smartphone, a computer and/or the cloud
- It is supplied with a Type2 connector cable (the standard in Europe)
- It is supplied with load-balancing sensor
- It is equipped with RFID reader and with two RFID keys
- It is eligible to participate in the Arera trial
- Resistant to rain and water jets, IP65 protection rating
Prism Basic single-phase
Prism Basic incorporates all the essential functions for charging an electric car:
- 230V single-phase version, for charging powers up to 7.4kW (depending on the meter to which it is connected)
- It is supplied with a 5mt cable (even if you park the car with the charging door far from Prism, the cable still reaches the car)
- It is suitable for any single-phase electric-meter, of any power (a 3kW meter is enough and when you boost the power of the electricity-meter, Prism Basic will be ready to provide even more power)
- It automatically regulates consumption to avoid electric grid disconnection (you will never have to reset the electricity-meter because of excessive absorption)
- Supplied with 5-meter cable and Type2 connector (the standard in Europe)
- Supplied with the sensor required for load balancing
- Upgradeable to Prism Solar even at times after purchase, getting all the functions of a Prism Solar by simply replacing the supplied front cover with a Smart Cover (available as a separate accessory)
- Resistant to rain and water jets, IP65 protection rating
Custom Cover
Customize the front cover of Prism with the colors and logo of your company:
- High-quality screen printing, like the original Prism covers (not a simple sticker)
- Resistant to atmospheric agents
- Perfect to promote your business, to provide your web address or email address for support
- Compatible with all products in the Prism Range
Customization is FREE for orders of at least 20 pieces of the same type!
The patterns and colors shown are purely demonstrative of branding opportunities.
Homer
Homer, the first portable charger that never trips your meter.
Homer is the first Mode 2 portable charger to combine ease of use, safety, and smart energy management. It plugs into a standard Schuko outlet, is controlled via app, adapts to your home's energy consumption, and requires no installation whatsoever.
It's the ideal solution for anyone who can't (or doesn't want to) install a wallbox, but still wants an advanced, reliable, connected charging experience, whether in an apartment building, at a second home, or on the road.
With Homer, you can charge with complete peace of mind: it communicates directly with your Open Meter through the Chain2 protocol, adjusting power in real time to prevent blackouts.
Bi-facial support pole for Prism
Support pole for ground installation:
- It allows to install 1 or 2 Prism chargers
- For Prism Basic and single- and three-phase Prism Solar
- With a rised part for cable and connector support
- It is supplied with screws for fixing Prism to the pole
- It is ready to install the second Prism, supplied with screws
- Pole dimensions are mm. 50 x 150 h.1340
- Weight 12Kg
- Dimensions of the fixing base mm. 200 x 250
- Note: it is NOT supplied with dowels for fixing the base to the flooring
RFID Smart Cover for Prism Basic
Smart Cover is the front cover that allows you to upgrade Prism Basic: from being the primary home charger for electric vehicles to Prism Solar Single-phase, obtaining all the features not originally foreseen. By replacing the standard front cover of Prism Basic with the RFID Smart Cover, the charger retains all the original features of Prism Basic, but it also gets:
- The management of the excess energy produced by a photovoltaic system. Prism uses it to recharge the car instead of sending it to the electricity network
- It works well with an energy storage system, such as a Powerwall
- It is directly connected to the internet via Wi-Fi or Ethernet (connecting it to your house router with a wire)
- The possibility to be managed via smartphone, desktop and cloud
- The integration of RFID reader
Car extension cable
5 meter AC charging cable with 2 Type 2 connectors for public AC (alternating current) columns. It withstands currents up to 32A both for the single-phase version (i.e. up to 7.4kW) and for the three-phase version (i.e. up to 22kW).
Set of 3 1000A sensors
Set of 3 1000A sensors for cluster installation of Prism Solar or Prism Solar S
- to be used in place of the standard sensors supplied with each Prism, which accept power cables up to 16mm in diameter, in systems with more than 5 Prism units or where large-diameter power cables are present
- split-core, accept power cables up to 50 mm in diameter
- supplied in a package of 3 pieces (for three-phase systems)
- dimensions 10.5x7x5 cm
Warranty Extension
12/24/36-month warranty extension:
- Extends the warranty terms set out in our terms of sale by 12, 24, or 36 months
- The warranty can be extended by up to 36 additional months on top of the standard 24 months, reaching a maximum of 60 months
- Can only be combined with Prism Basic and Prism Solar (in its various variants); it doesn't apply to other products
- Valid for a single Prism or Homer unit and must be purchased at the same time as the Prism / Homer itself; it cannot be purchased at a later time
Prism Powerbank
- 3000 mAh of spare power for your mobile devices!
- It is rechargeable with the micro-usb port and the included cable
- Usb-A port is the main power output
- It comes with a triple output adapter cable that can be used both to charge the Power Bank and to power devices with different connectors: USB-C, micro-USB and Lightning (iPhone and iPad)
- Dimensions: 11 x 10 x 3 cm.
- Input: DC 5V - 1000 mA
- Output: DC 5V - 1000 mA
Holdy
Holdy is the cable and connector support bracket for a charging column:
- It is made of solid plastic material
- It is suitable for single-phase and three-phase EV chargers
- It also accepts cables up to 7mt
- It can also be used as an holder for the connector (Type 2)
- It is supplied with wall fixing plate and bolts
RFID Card Set
Pack of 3 or 10 RFID cards:
- Compatible with all Prism Solar Single-phase and Three-phase units for user authentication
- With a space for notes
- Pairing with a single Prism Solar, or with a Prism Cluster
Cerchi un caricatore per la tua auto elettrica? Wallbox e caricatori per auto elettrica Made in Italy Silla Industries
Dal 2019, Silla Industries progetta e produce a Padova soluzioni di ricarica per veicoli elettrici che dialogano con il tuo impianto elettrico. Oltre 50.000 prodotti installati in Italia, 4.8/5 su Trustpilot, assistenza tecnica diretta: un'azienda che risponde in prima persona di ogni wallbox che esce dalla propria sede.
Homer: il caricatore portatile che non fa mai saltare la corrente
Homer è il caricatore portatile per auto elettrica che usa i cavi elettrici esistenti per dialogare direttamente con il contatore di rete tramite il protocollo Chain2 senza sensori aggiuntivi, senza lavori murari, senza bisogno di un elettricista. Monitora i consumi in tempo reale e riduce automaticamente la potenza di ricarica quando altri elettrodomestici sono in funzione, eliminando il rischio di distacco. Ideale per chi vive in affitto, in condominio o in una seconda casa: si attacca alla presa e funziona subito.
Gamma Prism: le wallbox monofase e trifase con integrazione fotovoltaica e V2G e V2H
La gamma Prism comprende wallbox da parete da 7.4 kW a 22 kW, con load balancing integrato, RFID, gestione intelligente dei consumi e app dedicata. Prism Solar ottimizza la ricarica in base all'energia prodotta dai pannelli solari, massimizzando il risparmio in bolletta. Prism NG aggiunge il protocollo Chain2 e la predisposizione al V2G (Vehicle-to-Grid), rendendola la wallbox italiana più tecnologicamente avanzata oggi disponibile sul mercato. Tutti i prodotti Silla sono certificati CE, conformi alle normative CEI vigenti e idonei alla detrazione fiscale del 50% tramite il Bonus Ristrutturazioni.
